YINHAI—YHAYINHAI-YHA SERIES RUBBER ROLLER SEALED BEARING TRICONE BIT PARAMETER REKOMENDASI lan FORMASI sing ditrapake
| NO. | IADC | nyaranake paramèter | tatanan aplikasi | |
| WOBKN/mm | RPMr/min | |||
| 1 | 114, 115 | 0.3-0.75 | 180~60 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, watu lempung, kretaceous |
| 2 | 124, 125 | 0,3-0,85 | 180~60 | tatanan alus karo kekuatan compressive kurang lan drillability dhuwur, kayata mudstone, gypsum, salinastone, shale alus lan watu gamping alus |
| 3 | 134, 135 | 0.3~0.95 | 150~60 | Formasi alus nganti pertengahan alus kanthi kekuatan tekan sing sithik lan kemampuan pengeboran sing dhuwur, kayata shale mid-soft, anhidrit, watu gamping mid-soft, sandstone mid-soft lan tatanan alus kanthi interlayer hard |
| 4 | 214, 215 | 0.35~0.95 | 150~60 | Formasi medium kanthi kekuatan tekan dhuwur, kayata shale mid-soft, anhydrite, limestone mid-soft, sandstone mid-soft lan formasi alus kanthi interlayer hard |
| 5 | 244 | 0,35~0,95 | 150~50 | Formasi mid-hard kanthi kekuatan tekan dhuwur, kayata shale abrasiveness, watu gamping, watu pasir, dolomit lan anhidrit, marmer |
| 6 | 324 | 0.4~1.0 | 120~50 | Pembentukan abrasiveness medium, kayata shale abrasiveness, watu gamping, dolomit lan anhidrit, marmer |
| 7 | 515, 525 | 0.35-0.9 | 180~60 | Formasi alus kanthi kekuatan tekan sing sithik, kayata mudstone, gipsum, salinastone, shale lembut, watu gamping lunak |
| 8 | 535, 545 | 0.35~1.0 | 150~60 | Formasi alus nganti medium kanthi kekuatan tekan sing sithik, kayata shale mid-soft, limestone mid-soft, sandstone mid-soft lan formasi medium kanthi interbeds abrasiveness harder. |
Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan.
YINHAI—YHAYINHAI-YHA SERISES RUBBER JOURNAL SEALED BEARING TRICONE BITS PARAMETER YANG DIREKOMENDASIKAN DAN FORMASI YANG BERLAKU
| NO. | IADC | nyaranake paramèter | tatanan | |
| WOBKN/mm | RPMr/min | |||
| 1 | 116, 117 | 0.35~0.8 | 150~80 | Formasi sing alus banget kanthi kekuatan tekan sing sithik lan kemampuan pengeboran sing dhuwur, lempung, mudstone, kretaceous. |
| 2 | 126, 127 | 0.35-0.9 | 150-70 | Formasi alus kanthi kekuatan tekan sing sithik lan kemampuan pengeboran sing dhuwur, kayata mudstone, gipsum, salinastone, shale lembut, watu gamping alus. |
| 3 | 136, 137 | 0.35~1.0 | 120~60 | Formasi alus nganti pertengahan alus kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, shale mid-soft, anhidrit, watu gamping mid-soft, sandstone mid-soft lan formasi alus kanthi interbeds hard. |
| 4 | 216, 217 | 0.4~1.0 | 100~60 | Formasi alus nganti medium kanthi kekuatan tekan sing sithik, kayata shale mid-soft, limestone mid-soft, sandstone mid-soft lan formasi alus kanthi interbeds hard. |
| 5 | 246, 247 | 0.4~1.0 | 80~50 | Formasi mid-hard kanthi kekuatan tekan dhuwur, kayata hard shale, watu gamping, watu pasir lan dolomit |
| 6 | 417, 437, 447 | 0.35-0.9 | 150-70 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, mudstone, kretaceous, gipsum, salinastone, shale alus lan watu gamping alus |
| 7 | 517, 527 | 0.35~1.0 | 140–60 | formasi alus karo kekuatan tekan kurang, kayata mudstone, gipsum, salinastone, soft shale lan limestone alus |
| 8 | 537, 547 | 0.45-1.0 | 120~50 | Formasi alus nganti medium kanthi kekuatan tekan sing sithik, kayata shale mid-soft, limestone mid-soft, sandstone mid-soft lan formasi medium kanthi interbeds abrasiveness harder. |
| 9 | 617, 627 | 0.45~1.1 | 90~50 | Formasi mid-hard kanthi kekuatan tekan dhuwur, kayata shale hard, watu gamping, watu pasir, lan dolomit |
| 10 | 637 | 0.5-1.2 | 80~40 | Formasi keras kanthi kekuatan tekan dhuwur, kayata watu pasir, watu gamping, dolomit lan anhidrit, marmer |
Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan.
YINHAI-JYINHAI-J SERISES METAL SEALED BEARING TRICONE BITSRECOMMENED PARAMETERS AND APLIKASI FORMASI
| NO. | IADC | nyaranake paramèter | tatanan | |
| WOBKN/mm | RPMr/min | |||
| 1 | 116, 117 | 0.35~0.8 | 280~80 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, watu lempung, kretaceous |
| 2 | 126, 127 | 0.35~0.9 | 240~80 | Formasi alus kanthi kekuatan tekan sing sithik lan kemampuan pengeboran sing dhuwur, kayata mudstone, gypsum, salinastone, shale lembut, lan watu gamping alus. |
| 3 | 136, 137 | 0.35~1.0 | 240~60 | Formasi alus nganti pertengahan alus kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, shale mid-soft, anhidrit, watu gamping mid-soft, sandstone mid-soft lan formasi alus kanthi interbeds hard. |
| 4 | 417, 437, 447 | 0.35~0.9 | 240~70 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, mudstone, kretaceous, gipsum, salinastone, shale alus lan watu gamping alus |
| 5 | 517, 527 | 0.35~1.0 | 220~60 | formasi alus karo kekuatan tekan kurang, kayata mudstone, gipsum, salinastone, soft shale lan limestone alus |
| 6 | 537, 547 | 0.45~1.0 | 220~50 | Formasi alus nganti medium kanthi kekuatan tekan sing sithik, kayata shale mid-soft, limestone mid-soft, sandstone mid-soft lan formasi medium kanthi interbeds abrasiveness harder. |
| 7 | 617, 627 | 0.45~1.1 | 200~50 | Formasi mid-hard kanthi kekuatan tekan dhuwur, kayata shale hard, watu gamping, watu pasir, lan dolomit |
| 8 | 637 | 0.5~1.1 | 180~40 | Formasi keras kanthi kekuatan tekan dhuwur, kayata watu pasir, watu gamping, dolomit lan anhidrit, marmer |
Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan.
| (TCI BITS MT BITS KEMASAN KOTAK KAYU REFERENSI) | |||||
| (Ukuran) | (L * W * H CM) | bobot kothak kayu) | Bobot Net TCI | KG | |
| 4 3/4 | 16*14*25CM=0,0056 | 1 | 10 | Bobot pallet 13KG | |
| 5 1/2 | 16.5*15.3*24CM=0.0060588 | 14 | |||
| 5 7/8 | 19*17*34CM=0,010982 | 1.9 | 16 | ||
| 6 | 19*17*34CM=0,010982 | 1.9 | 16 | ||
| 6 1/8 | 20*17*35CM=0,0119 | 1.9 | 18 | 18 | |
| 6 1/2 | 20*17*35CM=0,0119 | 1.9 | 19 | 18 | |
| 7 | 17 | ||||
| 7 1/2 | 24*21*41CM=0,020664 | 2.8 | 31 | 24.7 | |
| 7 7/8 | 25*22*41CM=0.02255 | 2.8 | 31.5 | ||
| 8 1/2 | 27*23.5*41CM=0.0260145 | 3 | 39 | 35 | |
| 8 3/4 | 270*235*410=0.0260145 | 4 | 40 | 38 | |
| 9 1/2 | 30*27*47CM=0.038070 | 4 | 52 | 52 | |
| 9 5/8 | 30*27*47CM=0.038070 | 4 | 61 | ||
| 9 7/8 | 30*27*47CM=0.038070 | 4 | 61 | Cathetan: waos baja 9 7/8 Dhuwur 38.5CM, Dhuwur kothak kustomisasi + 3CM | |
| 10 5/8 | 320*300*500=0,048 | 5 | 78 | Cathetan: 10 5/8 dhuwur 39CM, Dhuwur kothak kustomisasi + 3CM | |
| 11 3/4 | 35.5*32*54CM=0.061344 | 7 | 92 | ||
| 12 1/4 | 37*33.5*54CM=0.066933 | 7.13 | 98 | 90 | |
| 13 7/8 | 41*37*59CM=0.089503 | 8.73 | 107 | 100 | |
| 14 3/8 | 440*400*600=0,1056 | 12 | 174 | 146 | |
| 15 | 44*40*60CM=0,1056 | 12 | 151 | 170 | |
| 15 1/2 | 45,5 * 42,5 * 60 = 0,116025 | 14 | 200 | ||
| 16 | 470*435*660=0.134937 | 12.8 | 235 | ||
| 17 | 51*57*68CM=0,197676 | 17.3 | 250 | 205 | |
| 19 | 550*510*680=0.19074 | 20 | 280 | ||
| 20 | 58*55*68CM=0,21692 | 259 | 540*560*810=0.245 | ||
| 22 | 590*610*800=0.288 | 416 | 590*610*800=0.288 | ||
| 23 | 920*720*720 | ||||
| 24 | 670*640*850=0.364 | 488 | 670*640*850=0.364 | ||
| 26 | 930*760*760=0.537 | 750 | 553 | Kotak kayu gigi baja | |
| 28 | |||||
Referensi perhitungan kotak kayu: mata bor L + 60mm, W + 30mm, H + 90mm
| Bor kotak Karbon | ||
| Ukuran | L * W * H CM | Bobot |
| 8 1/2 | 245*240*400 | 0.9 |
| 9 1/2 | 290*270*435 | 1.1 |
| 12 1/4 | 330*320*470 | 1.6 |
| Tipe Rock | watu atose | watu sasmita |
| watu lendhut | alus | 1 |
| shale alus | ||
| tuff | ||
| gip | ||
| sandstone | alus | 2 |
| sandstone longgar | ||
| shale | ||
| sale lemah beku | Mid-Alus | 3 |
| es | ||
| kapur medium hard | ||
| sandstone alus | ||
| serpih pasir | ||
| slate lempung | Mid-Alus | 4 |
| watu gamping pasir | ||
| schist alus | ||
| mediun hard sandstone | Mid-Hard | 5 |
| silstone | ||
| simpenan sedimen | ||
| watu gamping | ||
| shale hard | ||
| kapur medium hard | Mid-Hard | 6 |
| watu gamping atos | ||
| watu serpentine | ||
| schist | Mid-Hard | 7 |
| kapur dolomit | ||
| batu silika keras | ||
| andesit | ||
| schist hard | Mid-Hard | 8 |
| mika schist | ||
| marmer granit ireng | ||
| dolostones | ||
| diabase | ||
| pegmatite | Hard | 9 |
| batu hematite | ||
| magnetit | ||
| schists metamorf | Hard | 10 |
| gneiss | ||
| granit | ||
| leptit | ||
| diorit basalt | ||
| gabro | Atos banget | 11 |
| porfiri | ||
| rhyolite | ||
| trachytic | ||
| konglomerat | ||
| lron suinite | hard banget | 12 |
| batupasir keras | ||
| kuarsit | ||
| pirit | ||
| hematite pita | ||
| silikolit |
Ya, kita bisa nampa, kita bisa menehi label merek dagang lan nggawe paket khusus miturut syarat khusus pelanggan.Mulane, kita butuh kertas desain kemasan saka klien kita, kalebu merek, tandha, label, volume, ukuran, bahan kothak lsp.
